Industry Cabinet Painting
Industry sits in Austin County with 282 people across roughly 1.1 square miles, and housing stock varies street to street. Our cabinet painting scope is set after we look at your house rather than off a price sheet, because Cure time before heavy use is longer than dry time, and we say so up front.
Our Cabinet Painting scope in Industry
- Boxes degreased, then deglossed by hand
- Bonding primer on every face that will show
- Hard cabinet-grade topcoat sprayed for an even film
- Hardware reset and doors rehung to the original openings
- Doors and drawer fronts removed, labelled and sprayed off site of the kitchen
Homes in Industry share conditions with the surrounding Austin County communities, New Ulm (5.8 mi), Bellville (14.3 mi), Sealy (24.5 mi) among them: the same soils, the same weather load, the same building eras. Cure time before heavy use is longer than dry time, and we say so up front.
Set in Austin County, Industry spans about 1.1 square miles with a population of 282 (2023 est.); New Ulm sits 5.8 miles away and Bellville 14.3, both inside our coverage.
Four stages, every time: a free on-site look at your Industry home, a written quote you can hold us to, the work itself done in sequence, and a final walkthrough where you sign off before we do.
Industry at a glance
- County
- Austin County
- Population (2023 est.)
- 282
- Land area
- 1.1 sq mi
- Type
- Census place
Source: US Census Bureau population data (2023 estimates for cities, 2020 Census for unincorporated places) and the Gazetteer place file.
Local conditions we plan for
- Cure time before heavy use is longer than dry time, and we say so up front
- Kitchen grease is the single most common reason a cabinet repaint peels, so degreasing is not optional
Signs you need cabinet painting in Industry
These are the warning signs we hear about most often on cabinet painting calls across Austin County. If any of them sound like your house, it is worth a free walkthrough before the problem grows.
- Doors and drawer fronts that look worn while the boxes are still solid
- Kitchen grease and hand oils darkening doors around the handles
- A dated wood tone dragging down an otherwise good kitchen
- Chipping or peeling on a previous DIY cabinet paint job
What cabinet painting costs in Industry
Pricing cabinet painting honestly means admitting what we cannot know from Industry street view: the variables below. A free walkthrough settles them, and your written quote shows exactly which ones drove your number.
- Color change: dark-to-light conversions need more coats
- Condition: grease, old finishes and previous paint add prep hours
- Boxes and end panels included, or doors and fronts only
- Door and drawer count: the job is priced by the piece, not the room
Why Industry homeowners call JM Painting
We are not the cheapest bid in Austin County and do not try to be. The bid that skips preparation is cheaper right up until the work fails, and our Industry customers tend to be people who have bought that lesson once already.
Touch-ups and callbacks are where distance shows. With New Ulm just 5.8 miles from Industry on the same route, coming back to make something right is a detour for us, not a lost day, so it actually happens.
Cabinet Painting near Industry
Distance is the quiet tax on contractor work, which is why we publish ours: from Industry, New Ulm is 5.8 miles, Pine Island is 28.7, and the rest fall between — Bellville (14.3 mi), Sealy (24.5 mi), San Felipe (26.3 mi), Hempstead (26.7 mi), Pine Island (28.7 mi). All of it is regular route territory for us.
Industry Cabinet Painting FAQs
- Do you take on small cabinet painting jobs?
- We do, gladly. A day of cabinet painting in Industry slots into an existing route, and small jobs are where most of our repeat customers started.
- Do I need a permit for cabinet painting in Industry?
- It depends on the scope. Purely cosmetic work usually needs no permit, while anything structural, electrical or plumbing-related often does. We check the rules that apply to your address and handle what is required before work begins.
- Which areas near Industry do you also serve?
- The closest are New Ulm at 5.8 miles, Bellville at 14.3 miles, Sealy at 24.5 miles, San Felipe at 26.3 miles, and coverage continues across Austin County and the surrounding counties. Every community has its own cabinet painting page on this site.
- Are you licensed and insured?
- Licensed & Insured. We are happy to provide current documentation before any work begins at your Industry home.
- Can you handle other work while you are here?
- That is the point of hiring a company that does more than one trade. Painting, carpentry, doors, remodeling: one Industry scope, one crew, one schedule.
- Do you cover Industry?
- We do. Industry is part of our regular Austin County coverage and we work there routinely.
- Do you serve all of Austin County?
- Yes, Austin County is core coverage for us, Industry included, along with the neighboring counties in the Houston metro. If a project sits outside it, we say so on the first call instead of padding the price.
The fastest way to get a real number for cabinet painting at your Industry home is a walkthrough. Call (281) 935-7012, or fill in the request form and we will come to you.
Ready to get started in Industry?
The estimate costs nothing and commits you to nothing. We drive to Industry, walk the work with you, and leave you a number you can hold us to.
(281) 935-7012info@jmpaintingremodeling.com