Everything we do

Painting is what we do most, and it is where experience shows up fastest. Before a brush touches your walls we mask floors and fixtures, fill nail holes and cracks, sand glossy trim, scrape failing paint and spot-prime bare spots and stains. That prep is the difference between a finish that still looks sharp in eight years and one that peels by next summer.

Inside, we cut clean lines at ceilings and baseboards and keep your rooms livable while we work. Outside, we wash the siding, replace failed caulk at joints and windows and choose products rated for sun and moisture exposure. Cabinets get degreased, deglossed and sprayed for a hard, even finish, and fences get stained to slow the weathering that raw wood can't survive.

Doors are unforgiving work: a jamb that is out of plumb shows up as a gap at the top or a door that drifts open on its own. We shim and set interior and exterior units so they close evenly, latch cleanly and seal against weather, then case them out so the reveal is consistent all the way around.

For trim and baseboard we scribe to uneven walls and floors, glue and pin the miters, and fill and caulk before paint so corners stay tight instead of opening up with the first change in humidity. Cabinets and vanities are anchored to framing, leveled, and aligned so doors and drawer fronts line up across the run.